使用php通过Socket进行发信源码,支持发信认证
发布时间:2006-10-14 8:48:52   收集提供:gaoqian

使用php直接打开socket端口进行发信的小程序
特点是使用smtp认证,能够更好的使用满足一般网友建站需要。

整个源码附在本文中,同样内容可到下列地址下载。
转载请注明出处。

http://www.knowsky.com/download/phpsendmail.rar

<?
/******************************************/
/*          Php webmail sender            */
/*           www.ebugs.org                */
/* Copyright 富翁 in im286.com 2005.03.07 */
/*           转载请注明出处               */
/******************************************/

//使用前请首先按照提示进行配置发信认证的用户名、密码以及smtp服务器地址、发件人信箱等。
//注意将#替换成#,落伍(www.im286.com)负翁版权所有,可随意使用,但保留版权信息

//例子
echo send_mail('fuweng#im286.com','发信标题','发信内容');


function send_mail($to, $subject = 'No subject', $body) {
        $loc_host = "im286";            //发信计算机名,可随意
        $smtp_acc = "fuweng#im286.com"; //Smtp认证的用户名,类似fuweng@im286.com,或者fuweng
        $smtp_pass="password";          //Smtp认证的密码,一般等同pop3密码
        $smtp_host="smtp.im286.com";    //SMTP服务器地址,类似 smtp.tom.com
        $from="fuweng#im286.com";       //发信人Email地址,你的发信信箱地址
    $headers = "Content-Type: text/plain; charset=\"gb2312\"\r\nContent-Transfer-Encoding: base64";
    $lb="\r\n";                    //linebreak
           
        $hdr = explode($lb,$headers);     //解析后的hdr
    if($body) {$bdy = preg_replace("/^\./","..",explode($lb,$body));}//解析后的Body

        $smtp = array(
                //1、EHLO,期待返回220或者250
                array("EHLO ".$loc_host.$lb,"220,250","HELO error: "),
                //2、发送Auth Login,期待返回334
                array("AUTH LOGIN".$lb,"334","AUTH error:"),
                //3、发送经过Base64编码的用户名,期待返回334
                array(base64_encode($smtp_acc).$lb,"334","AUTHENTIFICATION error : "),
                //4、发送经过Base64编码的密码,期待返回235
                array(base64_encode($smtp_pass).$lb,"235","AUTHENTIFICATION error : "));
        //5、发送Mail From,期待返回250
        $smtp[] = array("MAIL FROM: <".$from.">".$lb,"250","MAIL FROM error: ");
        //6、发送Rcpt To。期待返回250
        $smtp[] = array("RCPT TO: <".$to.">".$lb,"250","RCPT TO error: ");
        //7、发送DATA,期待返回354
        $smtp[] = array("DATA".$lb,"354","DATA error: ");
        //8.0、发送From
        $smtp[] = array("From: ".$from.$lb,"","");
        //8.2、发送To
        $smtp[] = array("To: ".$to.$lb,"","");
        //8.1、发送标题
        $smtp[] = array("Subject: ".$subject.$lb,"","");
        //8.3、发送其他Header内容
        foreach($hdr as $h) {$smtp[] = array($h.$lb,"","");}
        //8.4、发送一个空行,结束Header发送
        $smtp[] = array($lb,"","");
        //8.5、发送信件主体
        if($bdy) {foreach($bdy as $b) {$smtp[] = array(base64_encode($b.$lb).$lb,"","");}}
        //9、发送“.”表示信件结束,期待返回250
        $smtp[] = array(".".$lb,"250","DATA(end)error: ");
        //10、发送Quit,退出,期待返回221
        $smtp[] = array("QUIT".$lb,"221","QUIT error: ");

        //打开smtp服务器端口
        $fp = @fsockopen($smtp_host, 25);
        if (!$fp) echo "<b>Error:</b> Cannot conect to ".$smtp_host."<br>";
        while($result = @fgets($fp, 1024)){if(substr($result,3,1) == " ") { break; }}
       
        $result_str="";
        //发送smtp数组中的命令/数据
        foreach($smtp as $req){
                //发送信息
                @fputs($fp, $req[0]);
                //如果需要接收服务器返回信息,则
                if($req[1]){
                        //接收信息
                        while($result = @fgets($fp, 1024)){
                                if(substr($result,3,1) == " ") { break; }
                        };
                        if (!strstr($req[1],substr($result,0,3))){
                                $result_str.=$req[2].$result."<br>";
                        }
                }
        }
        //关闭连接
        @fclose($fp);
        return $result_str;
}
?> 

 
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50