在ASP页里面注册DLL的VBScript CLASS
发布时间:2006-10-14 3:01:31   收集提供:gaoqian
-----------------------------------------------ROOT1---------------------------------------

*******************************************************************************************
*使用本CLASS可以管理并在ASP页里面注册你的DLL
*本CLASS在WIN 2K上测试通过
*注:使用本CLASS需要先建立一个XML文件。文件如下.打开记事本将如下3行存为*.XML文件
*
*    <?xml version="1.0" encoding="gb2312" standalone="yes"?>
*    <Dll列表>
*    </Dll列表>
*
*------------------------------------------------------------------------------------------
*范例:
*    dim objRegsvr32
*    set objRegsvr32 = new Regsvr32
*    with objRegsvr32
*        if .LoadXml("../MyDll.xml") then
*            call Response.Write("XML文件加载错误")
*            set objRegsvr32 = nothing
*            Response.End
*        end if
*        select case .AddNode("F:\web\cw31072\dll\test\MyClass.dll" , true) '添加新条目并注册DLL
*            case 1
*                call Response.Write("条目已经添加进XML文件!并成功注册DLL啦!")
*            case 0
*                call Response.Write("条目已经添加进XML文件!但注册DLL时失败!")
*            case -1
*                call Response.Write("XML文件里已经有该条目!该DLL也已经注册的了!")
*        end select
*        ..........................
*    end with
*            
*    '本CLASS非常简单,里面还有些方法,我就不举例了,看看就知道了。日后你可以打开
*    '该XML文件看你曾经注册过和待注册的DLL列表。
*    'XML文件里每个条目如下:<Dll 是否已经注册="1">F:\web\cw31072\dll\test\MyClass.dll</Dll>
*    'F:\web\cw31072\dll\test\MyClass.dll就是你DLL文件的路径
*    '是否已经注册="1"就是该DLL已经注册过,=“0”就是还没有注册呢!
*******************************************************************************************

Class Regsvr32

    private s_objXml
    private s_objNodeRoot
    private s_strXmlPath
    private s_strAttributeName
    
    '------------------------------------
    '目的:    加载DLL配置xml文件
    '参数:    XML文件地址
    '返回:    加载失败就返回TRUE
    '------------------------------------    
    public function LoadXml(strPath)
        set s_objXml = CreateObject("MSXML2.DOMdocument")
        s_objXml.async = false
        s_objXml.load(strPath)
        if s_objXml.parseError.errorCode <> 0 then
            set s_objXml = nothing
            LoadXml = true
            exit function
        end if
        set s_objNodeRoot = s_objXml.documentElement
        s_strXmlPath = strPath
        s_strAttributeName = "是否已经注册"
    end function
    
    '---------------------------------------------
    '目的:    添加一个DLL项目
    '参数:    strPath:    DLL文件地址
    '          blnReg:    添加后是否将其注册
    '返回:    如果要求添加后注册,注册成功就返回1,注册失败返回0,已经有该项目并注过册就返回-1
    '---------------------------------------------
    public function AddNode(strPath , blnReg)
        dim objNewNode
        dim strStart
        dim objNode
        strStart = "0"
        set objNode = SelectNode(strPath)
        if objNode is nothing then
            if Reg(strPath , true) then
                strStart = "1"
                AddNode = true
            else
                AddNode = false
            end if
            set objNewNode = s_objXml.createElement("Dll")
            call objNewNode.setAttribute(s_strAttributeName , strStart)
            objNewNode.Text = strPath
            call s_objNodeRoot.appendChild(objNewNode)
            call s_objXml.save(s_strXmlPath)
        else
            if blnReg then
                if objNode.Attributes.getNamedItem(s_strAttributeName).nodeValue = "1" then
                    AddNode = true
                else
                    if Reg(strPath , true) then
                        objNode.Attributes.getNamedItem(s_strAttributeName).nodeValue = "1"
                        call s_objXml.save(s_strXmlPath)
                    else
                        AddNode = false
                    end if
                end if
             else
                 AddNode = false
             end if
        end if
    end function
    
    '----------------------------------------
    '目的:    删除所有已经注册,或者没注册的节点
    '参数:    blnStart:    0=未注册的,1=已经注册的
    '返回:    执行了删除操作就返回TRUE,否则返回FALSE
    '----------------------------------------
    public function ReAllNode(byVal blnStart)
        dim objNode
        dim blnIsChange
        blnStart = CStr(blnStart)
        for each objNode in s_objNodeRoot.childNodes
            if objNode.Attributes.getNamedItem(s_strAttributeName).nodeValue = blnStart then
                call s_objNodeRoot.removeChild(objNode)
                blnIsChange = true
            end if
        next
        if blnIsChange then
            ReAllNode = true
            call s_objXml.save(s_strXmlPath)
        else
            ReAllNode = false
        end if     
    end function
    
    '-----------------------------------------
    '目的:    删除某一个节点
    '参数:    节点内容
    '返回:    找不到节点就返回TRUE
    '-----------------------------------------
    public function ReNode(strPath)
        dim objNode
        set objNode = SelectNode(strPath)
        if objNode is nothing then
            ReNode = true
        else
            call s_objNodeRoot.removeChild(objNode)
            call s_objXml.save(s_strXmlPath)
        end if
    end function
    
    
    '-----------------------------------------
    '目的:    寻找某个节点
    '参数:    strPath:   节点内容
    '返回:    找到就返回该节点,找不到就返回nothing
    '-----------------------------------------
    private function SelectNode(ByVal strPath)
        dim objNode
        strPath = UCase(strPath)
        for each objNode in s_objNodeRoot.childNodes
            if UCase(objNode.childNodes.item(0).nodeValue) = strPath then
                Set SelectNode = objNode
                exit function
            end if
        next
        set SelectNode = nothing
    end function
    
    '--------------------------------------------
    '目的:    查看DLL文件列表里某个文件注册状态
    '参数:    该文件路径
    '返回:    1=已经注册
    '          0=未注册
    '          -1=找不到该文件
    '--------------------------------------------
    public function CheckDll(strPath)
        dim objNode
        set objNode = SelectNode(strPath)
        if objNode is nothing then
            CheckDll = -1
        else
            CheckDll = Cint(objNode.Attributes.getNamedItem(s_strAttributeName).nodeValue)
        end if
    end function
    
    '--------------------------------------
    '目的:    将所有未注册的DLL注册
    '返回:    如果有某个DLL注册失败就返回TRUE
    '--------------------------------------
    public function RegAllNode()
        dim objNode
        for each objNode in s_objNodeRoot.childNodes
            if objNode.Attributes.getNamedItem(s_strAttributeName).nodeValue = "0" then
                if Reg(objNode.childNodes.item(0).nodeValue , true) then
                    objNode.Attributes.getNamedItem(s_strAttributeName).nodeValue = 1
                else
                    RegAllNode = true
                end if
            end if
        next
    end function
    
    '-----------------------------------------
    '目的:    注册DLL
    '参数:    strPath:    要注册Dll文件路径
    '          blnLoding:    是否等待注册完成才继续执行程序
    '返回:    如果blnLoging=TRUE,注册成功就返回True
    '-----------------------------------------
    private function Reg(strPath , blnLoding)    
        dim objShell
        set objShell = CreateObject("Wscript.Shell")
        if objShell.Run("regsvr32.exe /s " & strPath , , blnLoding) = 0 then
            Reg = true
        end if
        set objShell = nothing
    end function
    
End Class
 
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50